Vertical Swing Cylinder

Flange mounting, double acting, threaded port / manifold port

 

Description :

Vertical swing cylinders are used in applications similar to that of swing cylinders and can replace swing cylinders in many places. In the unclamped position, the work piece area is free from the strap, to facilitate easy loading / unloading. It is a double acting cylinder. The job gets clamped in the piston push direction. The clamping strap is connected to the piston by a linkage mechanism.

Installation

Installation of the cylinder is very simple with 4 cap screws on the top flange. For threaded port cylinders clamp and de-clamp ports are provided on face of the mounting flange as shown in figure. For manifold port cylinders clamp and de-clamp ports are provided on bottom face of the mounting flange as shown in respective figure.

Specifications :

  • Maximum operating pressure - 150 bar.

Notes :

  • Standard strap has to be ordered separately. In case, a longer strap is required, it should be designed for increased bending moment.
  • The adjusting screw on the strap should be adjusted for a 3 mm reserve stroke.
  • For all cylinders, two ports are at rear side only.
  • For ordering the seal kit, add the prefix "S" to the part number.
Dimensional details for straps :
 
 
BORE PART NO. U V AB DB R W SP ST Z CT CA WA TP X Y CH WEIGHT
25 3204400 24.3 16.5 6.5 10 16 8 12 6 18.5 23.5 6 11.8 M6 6 6 4 0.15 kg
32 3201700 32 13 13 18 26 18 11 10.1 24 28 14 22 M6 8 12 5 0.2 kg
40 3200500 40 15 16 22 32 24 12.5 12.1 30 38 12 26 M10 10 15 6 0.4 kg
50 3206300 45.5 - 13 13 26 26 17.5 16 32 42 12 32 M12 12 12 5 0.5 kg
63 3203400 64 20 24 32 48 38 20.5 20.1 48 65 13 38 M16 16 22 10 1.0 kg
80 3211100 69 - 21 21 42 42 25 20 48 66 14 42 M16 16 22 10 1.2 kg
All dimensions are in mm, Overall dimension tolerance ± 0.5 mm.
Dimensional details for threaded port cylinders :
 
 
PART NO. WITH
THREADED PORT		 3110801 3111801 3111601 3111201 3111901 3112201
CLAMPING FORCE § 5.7 kN 10.3 kN 14.8 kN 22.4 kN 34.5 kN 54.8 kN
ØBORE 25 32 40 50 63 80
PORTS 2 2 2 2 2 2
A 51 70 82 90 112 134
D 66 82 93 105 125 155
B 40 55 63 70 85 100
C 40.5 47 52 60 69 88
F 51 62 69 78 97 118
T 22 30 35 35 42 48
d 14 18 22 30 36 45
E 26 28 30 30 36 48
H 17 17 17 17 19 19
N 57 70 79 91 113 139
S 47 60 72 80 102 115
DT 48 55 65 80 95 116
O 25.5 37 46 45 72 69
Q 71° 72° 67.4° 72° 67° 82°
BS 1/8" 1/8" 1/4" 1/4" 3/8" 3/8"
M 5.5 6.6 9 11 13.5 14
I 9.5 11 14.5 17 20 20
STROKE ± 1 23.5 30 36 40 55 65
OIL VOL push 12 cc 24 cc 45 cc 78 cc 171 cc 326 cc
OIL VOL pull 8 cc 16 cc 31 cc 50 cc 115 cc 223 cc
WEIGHT 1.5 kg 2.5 kg 4 kg - 11 kg -
PART NO. WITH
MANIFOLD MOUNTG.		 3111701 3111000 3110900 3111200 3112100 3112200
G 32 35 40 48 55 70
STD. STRAP 3204400 3201700 3200500 3206300 3203400 3211100
* Force is specified at 150 bar.
Cylinder part no is without strap, strap to be ordered separately.
Manifold mounting cylinder drawing details are given bellow.
All dimensions are in mm, Overall dimension tolerance ± 0.5 mm.
Subject to change for improvement. (Revision - August 13)
Dimensional details for manifold port cylinders :
 
 
PART NO. WITH
THREADED PORT		 3110801 3111801 3111601 3111201 3111901 3112201
CLAMPING FORCE § 5.7 kN 10.3 kN 14.8 kN 22.4 kN 34.5 kN 54.8 kN
ØBORE 25 32 40 50 63 80
PORTS 2 2 2 2 2 2
A 51 70 82 90 112 134
D 66 82 93 105 125 155
B 40 55 63 70 85 100
C 40.5 47 52 60 69 88
F 51 62 69 78 97 118
T 22 30 35 35 42 48
d 14 18 22 30 36 45
E 26 28 30 30 36 48
H 17 17 17 17 19 19
N 57 70 79 91 113 139
S 47 60 72 80 102 115
DT 48 55 65 80 95 116
O 25.5 37 46 45 72 69
Q 71° 72° 67.4° 72° 67° 82°
BS 1/8" 1/8" 1/4" 1/4" 3/8" 3/8"
M 5.5 6.6 9 11 13.5 14
I 9.5 11 14.5 17 20 20
STROKE ± 1 23.5 30 36 40 55 65
OIL VOL push 12 cc 24 cc 45 cc 78 cc 171 cc 326 cc
OIL VOL pull 8 cc 16 cc 31 cc 50 cc 115 cc 223 cc
WEIGHT 1.5 kg 2.5 kg 4 kg - 11 kg -
PART NO. WITH
MANIFOLD MOUNTG.		 3111701 3111000 3110900 3111200 3112100 3112200
G 32 35 40 48 55 70
STD. STRAP 3204400 3201700 3200500 3206300 3203400 3211100
* Force is specified at 150 bar.
Cylinder part no is without strap, strap to be ordered separately.
Manifold mounting cylinder drawing details are given bellow.
All dimensions are in mm, Overall dimension tolerance ± 0.5 mm.
Subject to change for improvement. (Revision - August 13)